JT-0108101 PS2 2.4GHz Wireless Controller direction     More PS2 Accessories   

Product Features

• External two “AA” alkaline batteries, capable of use for above 10 hours continuously;

•  Support multi-loop signal, simultaneous control, no mutual interference (max accommodating 20 sets of handles);

• Support DIGITAL and ANALOG mode;

• Operation distance in 8m, up to 10m maximum;

• With double vibration motor, excellent expression;

• Operation Instruction

• Receiver wiring:
  Insert the receiver into the main unit interface, then turn on the power, the green LED indicator is on, the yellow LED indicator flash. When receiving the handle, the yellow LED changes to be on.

• Handle wiring:
  When turning on handle power switch, it is in working mode. After the yellow LED of receiver changes to be on from flashing, showing the process succeed.

• Mode selection:
  The default mode of handle is digital mode (i. e. Digital mode after power on), red LED is off, press MODE key once, the red LED is on, at this time it is analog mode; press MODE key again to return to digital mode, so on and so forth. (Game disc requires supporting digital mode)

•  Power supply control:
  a.   Switch behind the handle controls the power of the whole unit
  b.   Control method: Power off when switch is at “OFF”, and connect the power when it is “ON”;

• Low consumption mode
  To save power and prolong the battery service life, handle is designed without low consumption mode, which is the following situation:
  a.       (During power on and wiring) When there is no connection between the receiver and handle, 3 sec later enter low consumption mode;
  b.       Under wiring status, if there is no connection between the receive and handle ,3 min later enter low consumption mode;
  c.       When receiver and handle disconnected, if it can not be reconnected within 3 min, enter low consumption mode;

What's in the box

• Controllers  * 1pcs

Packing Size(cm):

More PS2   Accessories    Top